Description
简介:
没有原型,没有灵感,freestyle的结果,笑死。
这是我画的mini伸缩剑系列第15把,PL(plasticitys塑料城)建模,一体打印、免装配,2h左右打印,尺寸刚好,大人小朋友都能玩。会继续开发这个系列。
好久不用PL,快捷键全忘光光,笑死。
参数说明:8%螺旋填充,接缝对齐,无brim,普通支撑(手绘),其他常规。
备注:
1.建议不要一次性打印多把,翻车概率会增加;
2.伸缩剑模型底面比较小,为防炒面或模型抖动导致错层,温馨提醒:清洁板子、喷胶/涂胶、热床+5℃;
3.如果首层几圈的模型粘连,没法打印完就拉伸,您可用美工刀稍微切一下;
4.如果某节伸缩不顺畅,可能是轻微的中间料子挤出问题或错层,多伸缩几次应该就顺畅了。
5.仅使用了pla打印测试,如果使用petg打印有概率粘连或者间隙太小影响伸缩,建议干燥耗材,并根据您实际情况调整孔洞补偿。
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

