obi wan kenobi
- All Printers
- Kobra S1 Max
- Kobra 3
- Kobra 2
- Kobra S1
- Kobra 4
- Kobra X
- Kobra 3 V2
- Kobra 3 Max
- Kobra 2 Max
- Kobra 2 Pro
- Kobra 2 Neo
- Kobra 2 Plus
No data
imagen generada con hueforge
Project: obi wan.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.65x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA smartfil black Transmission Distance: 0.4
PLA smartfil marron Transmission Distance: 5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 5 unique filaments
Swap Instructions:
Start with black
At layer #9 (0.8mm) swap to marron
At layer #13 (1.12mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.
- New Collection
Facebook
Pinterest
Twitter
Reddit
- Copy link
imagen generada con hueforge
The model cannot be found
The model may not have been published or does not exist
