openGrid hook for Kobra S1
Hook for mounting an OpenGrid on the side of the Anycubic Kobra S1.
Use hooks both at the top and the bottom.
Ignore the colors of the hooks in the picture—I was just test-printing the profiles in PETG and PLA. :-)
I used the OpenGrid Bare Directional Snap as the base but modified it slightly for easier printing.
Generate grid plates here: https://gridfinity.perplexinglabs.com/pr/opengrid/0/0
Create one that is 8 squares high and one that is 7 squares high, with any width you like.
For my testing, I just used 8 squares for the width, but for full coverage, I recommend using one 8-square plate and one 7-square plate.
I have also made hooks for
HSW (honeycomb storage wall) https://www.makeronline.com/en/model/Honeycomb%20storage%20wall%20(hsw)%20hook%20for%20Kobra%20S1/159347.html
Multiboard https://www.makeronline.com/en/model/Multiboard%20mounting%20hook%20for%20Kobra%20S1/169242.html
