0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-12-28 20:29:53
703
23
Report

pocahontas

@Quikytona_194752
Message
Follow
Description

Project: pocahontsbarco.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 200x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 3.1mm


Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA Smart Recycled Blue Transmission Distance: 2.2

PLA Smart Recycled Green Transmission Distance: 6.5

PLA Smart Recycled Red Transmission Distance: 4.4

PLA Kingroon White Transmission Distance: 5.8

PLA PolyLite Grey Transmission Distance: 1

PLA Kingroon Brown Transmission Distance: 2.7

PLA Smart Recycled Orange Transmission Distance: 5.7

PLA Smart Recycled Yellow Transmission Distance: 9.3

This print uses 9 unique filaments


Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #9 (0.8mm) swap to Green

At layer #12 (1.04mm) swap to Blue

At layer #13 (1.12mm) swap to Red

At layer #16 (1.36mm) swap to White

At layer #19 (1.6mm) swap to Grey

At layer #20 (1.68mm) swap to Brown

At layer #22 (1.84mm) swap to Orange

At layer #27 (2.24mm) swap to Yellow

At layer #31 (2.56mm) swap to White for the rest.


Tags
pocahontas
disney
License