0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-11-09 18:29:08
415
12
Report

witch hueforge

@Mysstra3Dart_894787
Message
Follow
Recommended printing method
Description

Project: bruja calabaza 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm


Filaments Used:

PLA smartfil black Transmission Distance: 0.4

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Beige Transmission Distance: 8

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments


Swap Instructions:

Start with black

At layer #13 (1.12mm) swap to Blue Gray

At layer #14 (1.2mm) swap to Beige

At layer #24 (2mm) swap to Jade White for the rest

Tags
witch
hueforge
License