0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-01-01 02:13:32
798
33
Report

wonder woman hue

@Quikytona_194752
Message
Follow
Recommended printing method
Description

Project: wonderwoman.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.6mm and the Actual Depth is 2.7mm


Filaments Used:

PLA Overture Chocolate Transmission Distance: 0.2

PLA BambuLab Matte Dark Red Transmission Distance: 1.5

PLA BambuLab Basic Beige Transmission Distance: 8

PLA Default White Transmission Distance: 5

This print uses 4 unique filaments


Swap Instructions:

Start with Chocolate

At layer #13 (1.12mm) swap to Dark Red

At layer #14 (1.2mm) swap to Beige

At layer #28 (2.32mm) swap to White for the rest.


pienso que el rojo oscuro seria mejor cambiarlo por un marron claro

Tags
wonderwoman
dc
License