All of this started when I had a crazy impulse and bought a 12V 120mm×120mm case fan.
I don’t even know why I bought it—I never even powered it on!
I thought someday I’d make something cool with it.
Well, that day came. I wanted to make a stylish fan!
So I powered it on to test the airflow… and completely missed the "ultra-quiet" label on it. A 1000 RPM fan is indeed silent… but it had zero airflow. Not a whisper of wind.
Frustrated, I went and bought a 2600 RPM PWM-controlled case fan instead.
"I will make a mini fan!"
...
Anyway, I did it!
I call it the "CYBER SMART Fan," and it still carries that Summit Dynamics aesthetic.
It includes an SFT-1 smart terminal: displays real-time mode/temperature/humidity/fan power.
Two modes (toggle via the terminal’s tactile button):
- AUTO Mode: Default. Fan adjusts speed based on ambient temperature (off below 18°C, 100% power above 30°C).
- WELD Mode: For soldering. Locks at 95% power. Manually flip the fan (since reversing motor polarity isn’t supported, and rotating the frame isn’t DIY-friendly). Now it’s an exhaust fan—effectively pulls soldering fumes at 12cm! (Auto-reverts to AUTO after 30 mins; can be re-enabled.)

Recreating this might be slightly tricky, but true tinkerers won’t be stumped—hahaha!
Code: See [Document 1: Code]
Wiring: See [Document 2: Wiring]
Materials Needed:
- 12V 120×120mm PWM case fan (4-wire, strongly recommend 2600+ RPM—or you’ll be frustrated)
- 12V 3-output power module
- 4 × 6mm×2mm round magnets
- 0.96" OLED screen
- ESP32-C3 microcontroller
- DHT11 temp/humidity sensor
- 8050 transistor
- Tactile switch
- Female-to-female Dupont wires
- 220Ω resistor (for transistor base)
- 12V 1.5–2A power adapter
What are you waiting for, makers? Get building!
————————————————————————————————————————————————————————————————
这一切的一切都要从我有一天抽风买了一个12V-120mm*120mm机箱风扇说起
我也不知道为什么买,甚至我没有通过电~!
我认为总有一天我能给他做个好东西
结果这一天来了,我想做个漂亮的风扇!
然后就通电试试风力……好的我完全没注意他标签上的“超静音”几个字…1000转的风扇确实很静音……但是真的没有风···没有一点点风
然后我越想越气,就干脆买了个带PWM调速的2600转机箱风扇
“我非做一个小风扇不可!”
……
无论如何,反正我做出来了~
- 我叫他赛博风扇,实际上他还是巅峰动力那个风格~~
- 包含一个SFT-1智能终端机:可以实时显示当前模式/温度/湿度/风扇功率
- 有两种模式:(按终端机上的轻触按键进行切换)
- AUTO模式:默认通电模式,这个模式下,风扇将会根据环境温度信息自主调整转速(18摄氏度以下将不启动风扇,30摄氏度以上则是100%功率)
- WELD模式:焊接专用模式,这个模式下,风扇将会锁定95%功率,此时,你需要手动把风扇换个方向(是的,手动换,本来我想让电机倒转,但是电脑机箱风扇不支持,然后转动风扇外框这个方案对复刻的人来说不友好就放弃了)此时,风扇变成了一个抽风装置,目测在12cm的距离可以非常良好的抽走焊接的臭气!(焊接模式最大持续30分钟,就会自动切换到AUTO模式,可以再次切换回来)

- 说实话可能复刻略微有些难度,略微。但是我认为难不倒真正的折腾大佬哈哈哈哈哈哈哈
- 代码部分请看【文档1 代码部分】
- 接线方式请看【文档2 接线方式】
- 物料需求:
- 需要一个12v 120*120mm电脑机箱风扇(需要4线调速版本,强烈建议2600rpm以上,不然你会感到生气)
- 需要1个12v 3路输出电源模块
- 需要4个6mm*2mm圆形磁铁
- 需要一个0.96寸OLED屏幕
- 需要ESP32 C3标准型 单片机
- 需要DHT11温湿度传感器
- 需要一个8050三极管
- 需要一个轻触开关
- 需要母对母杜邦线若干
- 一个220欧姆电阻(用于三极管基极)
- 一个12V1.5-2A的电源适配器
巧手大佬们,还在等什么?赶紧搞起来!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
