3D Maze Cube 3D迷宫

3D Maze Cube optimized for FDM printing. It does not need a clear casing like those maze cubes in the market. In my design, the ball will not fall out of the cube. Glue is needed during assembly.

3D迷宫，专为FDM打印进行了优化。不需要和市面上的迷宫一样在外面加一个透明外壳。没外壳球也不会掉下来。组装需要用到胶水。

2 printing profiles are available:

Single Color: Printing everything in one color (First Plate). The second plate is optional but recommended, you can print this plate if you want balls of a different color than your maze.

Multi Color: Printing each side of the maze in different colors.

我上传了两版打印配置：

单色：所有零件一次性单色打印（第一盘）。需要不同颜色的球可以打印第二盘（强烈建议打印）。

多色：6个面分开打印，可以用不同颜色。

Before assembly, please remove any stringing or abnormal strings, like those shown in the figure below.

安装前，请先去除拉丝和不正常的粗线，比如下图画叉处。