3D Printing Coaster or Wall Art

How many times did you say this phrase? :)

Do you have anyone in your family or friends who don’t feel comfortable asking again to print damaged item?

Don’t worry I CAN PRINT a new one! In the form of coaster (shown on the pictures) and as a bonus – bigger one to hang on the wall in your 3D printing studio! You may also share them with others to let them know you and your printer are ready to help! :)

Model size

Coaster – 10.5cm in diameter, 4mm thick

Wall Art – 23.1cm in diameter, 4mm thick

How to print this model

Model was prepared with 0.4mm nozzle and 0.2mm layer height in mind.

TIP! - If you want interesting and nice top surface as on the picture, change „Top surface pattern” from „Monotonic” to „Hilbert Curve”. Last layer will be printed slow, but trust me it is worth it!

Printed in three colors. Start with the base color (on my coaster it’s black). At layer 15 change it for another one to show nozzle (on my coaster is grey). At layer 18 change filament to last color for frame and letters (on my coaster it’s white). Same rules for both coaster and wall art verisons.

I like black/grey/white aesthetic but choose any colors you like most! If it turns out that the color combination used doesn’t look the best, well… you can always print a new one! ;)

If you decide to print wall sign, let the print bed cool down to room temperature before you release it. It’s big and thin so don’t let it deform.

If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Also check my other models, maybe you will find something interesting :) Thank you!

Happy printing! :)