A Game of Throne Bookmark - House Lannister

A Game of Thorne Bookmark - House Lannister.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 52.34x149.99mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Esun Red Transmission Distance: 6

PLA BambuLab Basic Orange Transmission Distance: 5

PLA+ Sunlu Beige Transmission Distance: 7.6

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Red

At layer #16 (1.36mm) swap to Orange

At layer #18 (1.52mm) swap to Beige for the rest.