Angry Sailor Moon - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

   PLA+ Sunlu Black Transmission Distance: 0.6

   PLA+ Esun Red Transmission Distance: 6

   PLA BambuLab Matte Ivory White Transmission Distance: 4

   PLA BambuLab Basic Pink Transmission Distance: 8

   PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:

   Start with Black

   At layer #8 (0.72mm) swap to Red

   At layer #14 (1.2mm) swap to Ivory White

   At layer #20 (1.68mm) swap to Pink

   At layer #21 (1.76mm) swap to Ivory White for the rest.