Anti Theft Protection (Zippers) Travel Essential (Print In Place)
This is a definite must need that all should have whenever your navigating through a busy airport or walking through a crowded street. This is a super fast an easy print that can be easily done and is definitely a must need beginner print!
This is a really easy print that can be printed very fast, if you want more accuracy for the print so that the walls don't melt together I wouldn't speed it up to fast. More tips below the print settings.
Make sure to check out my patreon page! If you join for free you can receive (free) exclusive models only on my patreon! Also have access to more updates, polls, requests, and many other things! My Master Printer Patreon
Make sure to check out this collection for more travel essential models! Enjoy! Travel Essential Models Collection
Print Settings:
Infill: 15%-75%
Infill Type: Gyroid
Supports: NO
Brim: NO
If your printer is not calibrated enough or is a bit older make sure to use this setting. Go into Prusa slicer then navigate to ‘print settings’ then find ‘advanced.' Once you find that scroll down to ‘slicing’ then 'X/Y Compensation. Once you get there change it to -0.1 or -0.15. If for some reason your printer is still melting the walls into each other change it to -0.2 or -0.25 at the most. Hope that helps enjoy! 🤓
Enjoy this awesome model!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
