2025-06-07 20:14:30
4.2k
278
Anycubic Ace Pro Lid Holder
@LeonEisenkolb_693616
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
More profile
53
Share
Description
Lid Holder for the Ayncubic Ace Pro Inspired by
https://www.makeronline.com/en/model/ACE%20Pro%20Lid%20Stops/173185.html
and
https://www.makeronline.com/en/model/ACE%20Pro%20Lid%20Stopper/185493.html
The Difference is that i Modeled the Stopper into the Cap so you can use the Original Screws if you dont have any Other Screws that Fit.
Print Settings:
Layer Height: 0.2 (if you Only want the Caps and want to be Accurate Print in 0.1 but also works with 0.2)
Infill: Doesnt Matter
Perimeters: 3 Walls
Wall Generator: Arachne
I also Modeled only the Caps so if one of yours Breaks its Easy to Repair.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
