Batman in DARKNESS

Project: Batman Oscuridad.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 The Model is 112.5x150mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#8c9099 PLA PolyLite Grey Transmission Distance: 1

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.88mm) swap to Blue Gray

At layer #13 (1.2mm) swap to Grey

At layer #18 (1.6mm) swap to White for the rest.