Chamber Hydro and Temp Gauge Holder for Kobra S1 Max Handle

It's a holder for the round 43mm hydrometer & temperature gauge that it's attached to the door handle

Doesn't interfere with door magnetic closure

Doesn't interfere woth bed movement

Optimum settings in included file

Recommended PETG or ASA, works well with PLA

Only 5gr filament, a 12 min print

Unscrew 2 screw from inside and attach the holder (with the gauge). Screw again handle and holder, using same screws

Same holder can also attached in the top handle

Works flawlessly with Kobra S1 Max

15/06/2026

Version 2

High Temps Profile included

Redesigned, now the gauge stays completely level with the holder

The usage of ASA is recommended, can also work with PLA or PETG

No further hardware required, just use the original handle screws

You can find gauges at Amazon or AliExpress:

https://www.aliexpress.com/item/1005007591429508.html?spm=a2g0o.order_list.order_list_main.15.21ef18023dRCQK

or

https://www.amazon.de/-/en/Digital-Indoor-Thermometer-Hygrometer-Thermo-Hygrometer/dp/B0DS2D9N13/ref=sr_1_9?dib=eyJ2IjoiMSJ9.QKvVNfKPJUQjV8iClE7bB0_AfkvEcKLjUmGheJ5QF-nmC477EpHGZF4nKkyY-hxZE4J5LQauPfCxhj4l13Sfy0g3JXSM4Q7gUPTMQt8mmcgJbCjQEOD-kkq55l4IUTEkgw2GxFzAwH78hpTtT-prgqTzytLRgDzSANbzhVr7uSWIzzttguMv4iXhiKbDJqUilVSEYWhNlqtjhtMRtKcMDDUC4xNrt4m9rSc793r5818P4aroaf3Pu_J6mebgM7xmSTVU0lZp7BZp2sP32zDl5AMxsdqK_lh9W_tSxqWgHck.tOEh28k7I1lOcqbpFv6X1t4tvuXbpQHydnYb1oAZIpA&dib_tag=se&keywords=Mini+Hygrometer+Thermometer+Digital%2C+%E2%84%83%2F%E2%84%89+Adjustable&qid=1779474117&sr=8-9