Comgrow PTFE Tube Adapters for Kobra X
These are the Adapters that go with my COMGROW DRYER MOUNTS.
Included are the 4 outer and 4 inner adapters
The template is also included to drill the holes in the exact place.
I used the template to drill all 6 holes.
Once the 6 holes are drilled install the adapters using 4 #6 x 3/8 screw for each dryer.
For easy PTFE tube install run the drill bit through the center into the inner adapter to give you the perfect angle of the hole.
You will need to purchase pneumatic connectors for the outer adapters like I have in the pictures.
Here is the link for the connectors: https://www.amazon.com/dp/B0CGV2JY8
I push the PTFE tube just a bit past the edge of the inner adapter
The Drill bit size I used for the hole is 11/64 (4.4mm)
I designed the adapters at an angle
I did install the adapters facing upwards and downwards. Even though both worked just fine, I preferred the downward facing because of the ease of loading the filament.
FOR BEST RESULTS:
Print The Profiles I have provided as I have set everything as needed.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
