Curtain Rod Holder โ Glue/Screw [ร 8mm]
Cafe Curtain / Net Curtain / Curtain Rod Holder [ร 8mm]
Rod holder for windows: Variants for gluing / screwing & optional plug pin
Small rod, big window drama? Not with this holder. ๐
This curtain rod holder for rods with ร 8mm is designed for windows and works just as well for cafe curtain rods or net curtain rods.
4 holder variants (distributed on 4 build plates)
- Screw mounting with 2 screw holes
- Adhesive mounting (if drilling is not an option)
- each with or without plug pin (as replacement/alternative)
- clearly distributed on 4 build plates
Printing recommendation
For maximum stability, I recommend printing lying flat.
Yes, it needs some support โ but that is manageable and pays off: standing on the mounting plate did not achieve the necessary stability in my tests. The holders are rotated on the plates so that the support side is inside and will later be largely hidden by the curtain.
Tip: The perfect solution would be to use PETG or, conversely, PLA only for the interface layer or for those who have it available: PVA.
Have fun printing! If you leave a like, a comment or a make, I'd be thrilled โ and it helps others greatly with model selection ๐
Print settings
- Layer height: 0.2 mm
- Wall generator: Arachne
- Wall lines: 6
- Outer wall (PLA/PLA+/PETG): approx. 130 mm/s
- Support: Normal (Auto)
- Pattern: Grid
- Only on build plate
- Remove small overhangs
- Top Z-distance: 0.1 mm (worked great)
- Small note: PETG is often more durable than PLA at the window when exposed to heat/sun.
๏ปฟ
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
