2026-04-21 19:06:21
328
11
Demon Slayer Water Hashira Bookmark - Hueforge
@Xeyos_1922543
Donate
Message
Follow
Recommended printing method
Add
PilastroAcquaSL_Front_50x150
Kobra 3
Kobra S1
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h2m
8
Share
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Cyan
At layer #12 (1.04mm) swap to Ice Blue
At layer #18 (1.52mm) swap to Jade White for the rest.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
