0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-01-18 06:10:20
4.6k
307
Report

Fast'n'easy-to-print Stargate Atlantis (No supports!)

@theKitCardGuy_3114481
Message
Follow
Description

Time and material saving

The model has been designed to enable fast, simple and material-saving printing. There are larger and more detailed models, but these require a much larger print area or the printing of several parts.


Improvements

I have removed the finest, hard-to-print details and added larger, better printable structures. The printing time is therefore shorter and the stability of the details and the entire model is greater.


Print

I strongly recommend printing with a maximum layer height of 0.2mm so that the fine details of the buildings are more visible. No supports required!

I do not recommend scaling the model down, as important details could be lost.

I printed in PETG with 0.3mm layer height with 3 perimeters. 25% Infill, lower infill should work.

 

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Tags
stargate
city
stargateatlantis
atlantis
zpm
License