Description
This hand-fan model is printed in place, with a tolerance of 0.3mm, ensuring excellent results. Once printing is complete, wait a few minutes for it to cool and then open it.
First, remove the two tabs by hand or cut them. Force the blades together at the bottom to free them from the shaft. Rotate the shaft by hand a few times to allow the blades to move more freely.
Finally, take each blade one at a time and expand it. Apply a little pressure if some blades are stuck together, but be gentle.
- If you want to add color, simply use the painting tool in Anycubic Slicer Next or Orca Slicer to select the layer you want to change color by selecting the object and dragging the highlighted part as shown in the figure, :
![]()
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

