2024-11-12 04:58:24
561
49
Hueforge Clint Eastwood
@Thrpedito_4847336
Donate
Message
Follow
Recommended printing method
Add
0.08mm layer, 1 walls, 100% infill
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 3h22m
12
Share
Description
Project: Clint Eastwood.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.8mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Gray
At layer #19 (1.6mm) swap to Grey
At layer #25 (2.08mm) swap to White for the rest.
Tags
License
Comments & Ratings
Here is empty
Remixes
