Iphone MagSafe Stand
Hi, this is Magnetic phone holder. It does not charge but only hold the phone in every orientation
Integration of magnets
Magnets are coming from AliExpress and are embedded in the part during the printing. To do this, you have to do a pause at the right layer and add magnets inside.
To this I recommend this short video.
Fuzzy skin on the base
For the base, you have two options. The first one is to print the model directly but there will be no fuzzy surface.
The other one is to use the 3MF file available. After importing to your slicer (I used OrcaSlicer), you can select the part that need to be fuzzy and apply the parametres to it.
Assembling
I made the base hollow withe a hole under to be filled with something heavier. I personnaly choose sand but it can be anything that passes through the hole.
After that you can glue the little pin, the phone part and the assembly is complete.
I also glued a TPU base underneath but this is not necessary.
Comments
If modifications are needed or if you have questions, you can write me directly !
