2025-05-22 03:09:39
1.7k
178
Jujutsu
@RONIN_3D_3618765
Donate
Message
Follow
Recommended printing method
Add
Jujutsu
#Anycubic Kobra S1
Kobra 3
、
Kobra S1
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h09m
74
Share
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 109.09x100mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Jade White
At layer #21 (1.76mm) swap to Yellow for the rest.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
