2026-09-02 03:19:25
177
1
Kangaroo Omni feeding pump tube holder
@DannyMartin-Poi_906692
Donate
Message
Follow
Recommended printing method
Add
feeding Tube holder
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
/ Plates:1
/ 1h39m
0
Share
Description
I was tired of error message of my feeding pump because or bend tube. I was given the tip by a nurse to tape the tube. So I designed this tube holder. I also addded a secondary holder for quick hold instead of the one on the side.
Use 100% infill you can also add walls.
To get a perfect fit , warm the rear part then install it and press it against the pump. So you will get a very snug fit. I also used a phosphorecent filament to be able to see where to put the tube when its dark.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
