0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-05-19 21:24:23
27.1k
1.6k
Report

Kobra S1 Ace Pro Riser

@Marek_3579580
Message
Follow
Recommended printing method
Description

Kobra S1 Ace Pro Riser by Marek Kozicki

Summary:

This is a riser for Ace Pro for Kobra S1. It consists of 4 printed elements and 4 aluminum rods with a diameter of 10mm. The rods are drilled at the ends with a drill of 3.2mm and threaded with an M4 tap. The length of the rods is: longer 384mm and shorter 200mm (two pieces each). Allen screws M4 8pcs.


License