Marlin FISH Hueforge art

MARLIN FISH HUEFORGE ART

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:

    PLA Generic Black Transmission Distance: 0.3

    PLA BambuLab Basic Gray Transmission Distance: 2

    PLA BambuLab Basic Silver Transmission Distance: 0.5

    PLA Generic White Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:

    Start with Black

    At layer #10 (0.88mm) swap to Gray

    At layer #15 (1.28mm) swap to Silver

    At layer #19 (1.6mm) swap to White for the rest.