Moon Knight #32 Comic Cover

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 126x206mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.16mm

#00000d PLA Anycubic Basic Black Transmission Distance: 0.1

#ffffff PLA Anycubic Basic White Transmission Distance: 6.3

#a54dcf PLA Anycubic Basic Purple Transmission Distance: 1.1

#fdc738 PLA Anycubic Silk Shiny Gold Transmission Distance: 2.9

#ffe500 PLA Anycubic Basic Yellow Transmission Distance: 5.8

#3cbfff PLA Anycubic PLA+ Tropical Turquoise Transmission Distance: 2

#ffffff PLA Anycubic High Speed Bright White Transmission Distance: 2.6

#bf1c07 PLA Anycubic High Speed Bright Red Transmission Distance: 4.4

This print uses 8 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to White

At layer #10 (0.88mm) swap to Purple

At layer #12 (1.04mm) swap to Black

At layer #13 (1.12mm) swap to Shiny Gold

At layer #17 (1.44mm) swap to Yellow

At layer #19 (1.6mm) swap to Tropical Turquoise

At layer #21 (1.76mm) swap to Bright White

At layer #25 (2.08mm) swap to Bright Red

This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.

Border Only Colors from here until the end.

At layer #27 (2.24mm) swap to Black for the rest.