2025-07-18 00:19:36
848
19
Motorcycle GPS holder
@MotoDragon_2175172
Donate
Message
Follow
Recommended printing method
Add
Motorcycle GPS holder
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h 03m 01s
9
Share
Description
It was made in Openscad and it is to hold my GPS bag:
http://www.louis.de/_10d2790dfbb4c522fb9c76b088ad51edb3/index.php?topic=artnr_gr&artnr_gr=10032971
These were printed in ABS, but ASA should work even better.
Print with 2-3 layers, infill 15-20% to add more strength to the parts + the mounting rings need to be drilled.
You also gonna need 2 x 5 /20 mm screws + nuts for the adjustments.
The width of the 3 plated holder is 3 mm, the middle piece is 2.5 thick so after print it will fit without problems... at least in my printer :)
The nuts were glued in after print as well as the screws in to the covers, so they stay were they supposed to.
Tags
License
