Nema 5-15 Plug

I have a bunch of 12V 2A DC inverters and I wanted to convert some of them from wall warts to inline inverters. So, I wanted to create a wall plug model to hold the prongs and install the wires.

Prongs can be heat pressed into slots in face plate. Prints fine at 0.2mm layer height with a 0.6mm nozzle and minimal support structure, if any.

WARNING: AC mains voltage can kill. Please do not mess around with it unless you know your local electrical codes and are certain you know exactly what you're doing.

Inspired by: https://free3d.com/3d-model/nema-5-15-male-plug-v1--938680.html