Nothing Box：打不开的机关盒 An inoperable fuse box
由于 pdf 视频播放不正常，拆开视频链接我放在这里
这，是一个机关盒——Nothing Box
关于五金，你需要：
- 12*3 磁铁 3 颗
需要 502 粘合
组装详见说明文件
预估解密时间：25---50min，有玩 puzzle 经验者可以更短一些
背景故事：太忙了，来不及写，后续会补上的
Due to the PDF video not playing properly, I opened the video link and put it here.
This is a puzzle box — Nothing Box.
For the hardware, you will need:
- 12*3 magnets, 3 pieces
502 adhesiveAssembly
instructions can be found in the instruction file.
Estimated time to solve: 25–50 minutes; those with puzzle experience may take a bit less.
Background story: Too busy to write it now, will add later.
盒顶可以黏上“Nothing Box”的铭牌
建议：对所有结构上油，否则可能因为打印精度较低卡住
务必清理所有毛刺（推荐使用尖嘴钳）
A 'Nothing Box' nameplate can be attached to the top of the box. Highly recommended: lubricate all structures, otherwise it may get stuck due to low printing accuracy.
Be sure to remove all burrs (using needle-nose pliers is recommended).
关于打开，请熟读并背诵以下口诀：
不许暴力！不许暴力！不许暴力！
（呵呵）
Regarding puzzles, please carefully read and memorize the following mantra: No violence! No violence! No violence! (Hehe)
内部结构一赏：
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
