Owl key holder
Cute Owl Key Holder
Features:
Owls fit into cut silhouettes. It is possible to adjust the height of the base (increase the distance from the wall). In the print profile, all parts are 7 mm.
Model's final orientation is different to placement on bed (is mirrored to give the a better surface => face down for PEI plates).
Print settings:
1st bed - Owls / keychains.
0.4 nozzle / 0.2 layer / 3 walls / 15% infill
I highly recommend brim!
2nd bed - Cover part
0.4 nozzle / 0.24 layer / 2 walls / 15% infill
3rd bed - Base part
0.4 nozzle / 0.24 layer / 2 walls / 15% infill
4th bed - Cover part with text
0.4 nozzle / 0.24 layer / 2 walls / 15% infill / wall generator Arachne
here you can edit your own text on the cover part.
Assembly instructions in the manual. But you can do it without it ;).
First attach the base to the wall. Screws/nails must be embedded! Then connect the Cover through the pins, you can use glue - it's better.
The colors of the model are up to you. The same goes for the material. I would recommend keychains = owls made of PETG.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
