Shredded Mini Suspended Filament Cube
The Design
This “Cube" comprises of 4 separate pieces connected only by suspended filament.
This piece's dimensions are approximately 50mm x 50mm x 20mm
Printing
Slice with the Arachne wall generator.
Ensure layer thickness is at 0.2mm, Line Width 0.42
Check the preview shows all of the suspended filament correctly
It's very delicate part and print
I haven't had any with bed adhesion, let me know if you do.
I recommend using some fairly strong PLA, i've used normal matte PLA but found Silk PLA to be too brittle.
Occasionally a filament line may fail. I recommend careful plucking it out - it won't affect the overall look.
NOTE: The overhang on the parts is extreme and the surface finish on the lower side isn't great (see pictures).
Do Let me know how you get on.
My Work
Thank you to everyone who has and is supporting me in my design work. A year and a half ago i never expected to be where i am today, and its all thanks to you!
Thank you for your support with likes and downloads. Thank you again!
If you enjoy my designs, please consider joining my Patreon:
https://www.patreon.com/RJ_Design
It includes more designs than i post here!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
