Sloffies or plakkies are what we call flip-flops/slides in Afrikaans, my language.
I have included a photo with a size chart.
I have included files to print your own packaging for your Sloffies.
I printed the Sloffies and straps with eSUN 95a TPU and the packaging with PLA.
I have included a test_print file you can slice to test the correct Infill Density for your TPU.
I have included a sloffies_strap openSCAD file you can use to customize the strap to fit.
Sloffies Sole print settings
Layer Height: 0.2
Infill Pattern: Gyroid
Infill Density: 3 - 10%(Personal preference)
Wall Line Count: 0
Top Layers: 10
Bottom Layers: 10
Sloffies Strap print settings
Layer Height: 0.2
Infill Density: 15%
Wall Line Count: 2
Top Layers: 4
Bottom Layers: 4
Packing bottom print settings
Layer Height: 0.2
Infill Density: 10%
Wall Line Count: 3
Top Layers: 6
Bottom Layers: 4
Support Overhang Angle: 60
Support Placement: Everywhere
Support Density: 0.3%
Support Z Distance: 0.1
Packing top print settings
Layer Height: 0.2
Infill Density: 10%
Wall Line Count: 2
Top Layers: 4
Bottom Layers: 6
Packing insert print settings
Layer Height: 0.15
Infill Pattern: Gyroid
Infill Density: 15%
Combing: Off
The included sizes are EU 39, 40, 41, 42, 43, 44.
When printing the Sloffies Sole, print on a textured bed to avoid the smooth bottom surface you get when printing on a glass bed.
When done printing, glue the Sloffies Strap into the grooves in the Sloffies Sole.
Thank you for supporting my design. I really appreciate it.
