Steering wheel for Xbox Controller
Made a few changes to the original model you download around. The “tiktok” version had a lot of problem turning due to excessive flessibility and wear trough time fast.
The Rack now is twice the lenght and works like a charm, the support where the rack slide are also 2 instead of 1.
I found the original wheel to be unconfortable, so i designed some more like the f1 one wich is my favourite one, the bmw one is olso good but lacks a bit in beauty. the cup one is a bit flexible but only to worry when removing the supports from printing.
I may also say that you need to trim a paper clip to make the pin to connect the rack and the pivot.
You also need a 608 bearing that you can get from a common fidget spinner. The measurements are the following: Inner Bore = 8 mm; Outer Diameter = 22 mm; Width = 7 mm.
Well that's it. Just remember to plug in the bearing before the rack or you'll destroy the teeth of the rack hahaha
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
