TRITON GAS MASK/RESPIRATOR V7

Items Required: 1 X 6mm Airsoft BB Activated Charcoal (For Gas or Air Filters) Cotton Makeup Removal Pads Non Toxic Glue * Instructions: 1) print all the parts once ( Filter parts X 2 each) 2) Glue the purge valve to the External Purge Valve Cover 3) Insert a 6mm Airsoft ball in the purge valve and squeeze the internal purge valve cover to the purge valve. 4) Press fit the Purge valve to the frame. 5) Insert the Front Adapter in the top of the filter and slide it all the way down. 4) Fill filter, 1st layer Cotton Makeup Pad, 2nd layer Activated Charcoal, 3rd layer Cotton Makeup Pads X 2, try to get the filler material as close to the top of the filter as possible. 6) Insert the Rear adapter in the top of the filter and slide it to compress the filler material. 7) Add the Filter Cover to keep everything in place. 8) Make two filter sets. 9) Attach your Filters to the Frame, (and a snorkel mouth piece OPTIONAL) and your sorted ;) Note: look at the schematics to get an idea of where all the parts go. !!!For Emergency Use Only!!! !Don't forget to check out my other designs and Follow my weekly KooKoo uploads, Enjoy ;)