Tanjirou from Demon Slayer, HueForge and AMS 4 Colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to RedAt layer #13 (1.12mm) swap to Out of Darts OrangeAt layer #20 (1.68mm) swap to Yellow for the rest.