The Nun Lightbox LED Lamp
"The Nun 3D Model" ๐ป
Step into the chilling world of "The Nun" with this eerie 3D model! Inspired by the terrifying character from the Conjuring Universe, this intricately designed piece will bring a touch of horror and suspense to your decor.
Recommendations before and after printing:
โข Use textured PEI sheet
โข To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole
โข For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover
โข Be careful to clean the table well
Materials and tools used to assemble parts:
โข Aluminum Tape for the back cover
โข Hot glue pistol to place in the spacing of the LEDs so they don't come off
โข Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch
โข White or RGB LEDs
To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
