2025-12-16 08:25:08
750
12
Ticwatch Pro 3 GPS Charging Stand
@Nekro_2487064
Donate
Message
Follow
Recommended printing method
Add
Ticwatch Better Stand PETG
Kobra 2 Pro
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h55m
2
Share
Description
Got tired of my watch constantly coming unplugged when charging. I did try a couple of different charging stands, but found them to be a bit on the weaker side or top heavy.
Decided to make a low profile one to throw under my monitors. Will need 2x M3x12mm bolts and 2x nuts to connect. I have a pause added on layer 371 if you're using my print profile to add the nuts and get them sucked into the print.
After adding the nuts, I'd suggest printing slow and surely instead of at 100% to keep it in place. It did seem like it wanted to crack the supports and knock it all over. Devastating at 99.6% :)
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
