Universal table saw outfeed system

Adjustable and portable table saw outfeed system

Do you own a contractor saw? Do you have an outfeed table for your saw? 

This model is for a complete outfeed system. It is modular, adaptable, adjustable and portable. It is also quick to assemble and remove.

Outfeed system

Have you ever seen an outfeed system for a contractor saw? They are common for cabinet saws but these fixed, costly and they take up lots of floor space.  I have yet to see a portable one for contractor saws.

What do you do to cut long pieces of wood or moldings? Do you ask your spouse or hope to find a helper? I often find myself this in situation and I am certain many are like me. I tried using a stand with a roller but often got frustrated. Unless I got the plane and height nailed down it would tip, move or cause my cut to veer off course. Usually, I would cross my fingers and either put a lot of pressure on the infeed side or stop halfway through the cut and lean or rush to grab the outfeed side. I was lucky. I only ended up with burn marks, uneven cuts or ruining the workpiece but I risked kickback or a more serious injury.

I set about designing an outfeed table system for contractor saws. The system had to offer the following:

• Adaptable to the different makes of contractors table saws that are sold. 
• Lightweight and portable;
• Easy and quick to install and remove;
• Adjustable in height, slope and adaptable to multiples environments (uneven floors, uneven heights, etc.)
• Affordable.

The design

The adaptability issue was somewhat of a challenge as most contractor saw fences latch at the front and back of the table and you cannot simply screw a hinge to the back of the table. My solution uses side brackets to which is attached a board and hinges.

My design is adaptable to most contractor table saws:

• It can be easily retrofitted to existing contractor table saws
• It can be adjusted for different thicknesses of outfeed boards;
• You can adjust the slope, height and distance of the outfeed support as needed using the mounting brackets, hinges and adjustable stand. 
• It will work in the workshop, on the jobsite and even on the tailgate of a pick-up.
• It is portable, lightweight, can be easily and quickly installed and is affordable to make.
• The design has been optimized for 3d printing. All parts are less than 200 mm to allow for printing on most 3d printers. The hinges are print in place.
• It is modular and offers different configuration options.
• The system is quick and easy to use.
• It will make cutting long boards safer and much easier.

Installations

A downloadable pdf installation guide is available. It is detailed with pictures and component lists. Click here for a link

Required non 3d printed materials

• 10 ¼-20 inch or M6 bolts and nuts (add 6 more for a dual outfeed support) to attach the mounting plates and hinges
• One 5/16 x 2 ½-3 inch bolt or M8 x 60-75 mm bolt – to reinforce the ball joint
• Wood screws (no. 6 and no. 8 ½ inc to ¾ inch (12 to 19 mm) in length or metric equivalent) to join the posts and secure the hinges and stand to the outfeed support board
• Plywood, particle board or phenolic mounting board (3-4 inch (75-100 mm) wide x width of your table saw) – to attach the hinges to the table saw
• Outfeed support board(s) width and length as you require.
• 
  

Optional 

• One ¼-20 x 1 or M6 x 25 mm bolt for the quick assembly spindle holder.

Printing

Print the ball joint with at least 6 layers and 50% infill.

The hinges and mounting brackets should preferably be printed with 50% fill.

About me

I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right.

If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you.

DISCOUNT AND AFFILIATE CODES FOR PRINTER AND FILAMENT

I am continuously trying to get discount codes from various manufacturers. Unlike many affiliate links these give discounts on purchases and are more difficult to obtain. In my requests I ask that they give me the codes with the most discounts for users even if it means a smaller commission.

HOW TO USE THE CODES

1.      You need to CLICK ON THE AFFILIATE LINK. The links are usually set up by countries/regions.

2.      Add the items you want to purchase

3.      Enter the DISCOUNT CODE at checkout. The codes vary by month and saving – so check back each month for the latest offers.

4.      You can only use ONE CODE so be certain to enter the one with the most discount 

ANYCUBIC – June 26th to August 31 2026

United States - US site

AFFILIATE LINK (CLICK THIS 1ST): https://store.anycubic.com/?ref=gnsbwzea

$30 off $400+ sitewide with code ACSUN30

$25 off $300+  on selected items with code ACSUN25

$20 off $200+ on selected items with code ACSUN20

$15 off $150+ sitewide with code ACSUN15

$5 off $50+ sitewide with code ACSUN10

$3 off $30+ sitewide with code ACSUN3

$10 off – Darren3dPrint10

$15 off – Darren3dPrint15

Australia - AU site

AFFILIATE LINK (CLICK THIS 1ST): https://www.anycubic.au/?ref=Darren3dPrint

$40 off $550+ sitewide with code ACSUN30

$35 off $400+  on selected items with code ACSUN25

$30 off $300+ on selected items with code ACSUN20

$20 off $200+ sitewide with code ACSUN15

$15 off $150+ sitewide with code ACSUN10

$7 off $70+ sitewide with code ACSUN5

$4 off $40+ sitewide with code ACSUN3

$10 off – Darren3dPrint10

$15 off – Darren3dPrint15

CANADA - CA site

AFFILIATE LINK (CLICK THIS 1ST): https://ca.anycubic.com/?ref=Darren3dPrint

$42 off $570+ sitewide with code ACSUN30

$35 off $430+  on selected items with code ACSUN25

$28 off $280+ on selected items with code ACSUN20

$21 off $210+ sitewide with code ACSUN15

$14 off $140+ sitewide with code ACSUN10

$7 off $70+ sitewide with code ACSUN5

$5 off $40+ sitewide with code ACSUN3

$10 off – Darren3dPrint10

$15 off – Darren3dPrint15

SPAIN - ES site

AFFILIATE LINK (CLICK THIS 1ST): https://www.anycubic.es/?ref=fldwnkel

30€ off 400€ + sitewide with code ACSUN30

25€ off 300€ + on selected items with code ACSUN25

20€ off 200€ + on selected items with code ACSUN20

15€ off 150€ + sitewide with code ACSUN15

10€ off 100€ + sitewide with code ACSUN10

5€ off 50€ + sitewide with code ACSUN5

3€ off 30€ + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

UNITED KINGDOM - UK site

AFFILIATE LINK (CLICK THIS 1ST): https://uk.anycubic.com/?ref=xhneqmoe

￡30 off ￡400 + on selected items with code ACSUN30

￡25 off ￡300 + on selected items with code ACSUN25

￡20 off ￡200 + on selected items with code ACSUN20 

￡15 off ￡150 + sitewide with code ACSUN15

￡10 off ￡100 + sitewide with code ACSUN10

￡5 off ￡50 + sitewide with code ACSUN5

￡3 off ￡30 + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

GERMANY - DE site

AFFILIATE LINK (CLICK THIS 1ST): https://de.anycubic.com/?ref=lbrowght

30€ off 400€ + sitewide with code ACSUN30

25€ off 300€ + on selected items with code ACSUN25

20€ off 200€ + on selected items with code ACSUN20

15€ off 150€ + sitewide with code ACSUN15

10€ off 100€ + sitewide with code ACSUN10

5€ off 50€ + sitewide with code ACSUN5

3€ off 30€ + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

FRANCE - FR site

AFFILIATE LINK (CLICK THIS 1ST): https://fr.anycubic.com/?ref=akeofafb

30€ off 400€ + sitewide with code ACSUN30

25€ off 300€ + on selected items with code ACSUN25

20€ off 200€ + on selected items with code ACSUN20

15€ off 150€ + sitewide with code ACSUN15

10€ off 100€ + sitewide with code ACSUN10

5€ off 50€ + sitewide with code ACSUN5

3€ off 30€ + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

EUROPE - EU site

AFFILIATE LINK (CLICK THIS 1ST): https://eu.anycubic.com/?ref=Darren3dPrint

30€ off 400€ + sitewide with code ACSUN30

25€ off 300€ + on selected items with code ACSUN25

20€ off 200€ + on selected items with code ACSUN20

15€ off 150€ + sitewide with code ACSUN15

10€ off 100€ + sitewide with code ACSUN10

5€ off 50€ + sitewide with code ACSUN5

3€ off 30€ + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

ITALY – IT

AFFILIATE LINK (CLICK THIS 1ST): https://anycubic.it/?ref=waimpcbq

30€ off 400€ + sitewide with code ACSUN30

25€ off 300€ + on selected items with code ACSUN25

20€ off 200€ + on selected items with code ACSUN20

15€ off 150€ + sitewide with code ACSUN15

10€ off 100€ + sitewide with code ACSUN10

5€ off 50€ + sitewide with code ACSUN5

3€ off 30€ + sitewide with code ACSUN3

10€ off – Darren3dPrint10

15€ off – Darren3dPrint15

POLAND - PL site：

AFFILIATE LINK (CLICK THIS 1ST): https://anycubicofficial.pl/?ref=aakjogpi

ACSUN30

ACSUN25

ACSUN20

ACSUN15

ACSUN10

ACSUN5

ACSUN3

$10 off – Darren3dPrint10

$15 off – Darren3dPrint15