2024-05-10 21:02:42
7.1k
842
Upright Print Brio 90 Degree Bridge Ramp
@Anselor_3041911
Donate
Message
Follow
Recommended printing method
Add
Kobra 2 Pro
Kobra 2 Pro
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 3h 28m 47s
90-degree left
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 6h31m
90-degree right
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 6h31m
252
Share
Description
Did a pretty simple edit using TinkerCAD extend the bottom of the upward slope. The original bridge had a gradual overhang that required 5 rows of overhang starting on the second layer. I've extended down the initial part of the ramp to get past that impossible overhang and now the bridge can be printed upright.
Printed mine with 3D Best Q 30% wood fill filament with a 0.4mm nozzle and 0.2mm layers. I used supports under the arches but I suspect you could get away without them.
Tags
License
This remix is based on
https://www.printables.com/model/138758-brio-bridge-ramp-90-degrees-corner
Comments & Ratings
Here is empty
Remixes
