Venice gondola HueForge → own picture

This is a unique HueForge picture. I took it myself in Venice (on the Grand Canal). There is no second copy of this image (unless it is copied).

If you use the STL, please follow the settings.

Otherwise, load profile.

Settings:

Print at 100% infill with a layer height of 0.08 mm with a base layer of 0.16 mm

Filaments Used:

PLA JAYO Black Transmission Distance: 0.3

PLA JAYO Gray Transmission Distance: 2.5

PLA+ Esun Orange Transmission Distance: 5

PLA JAYO White Transmission Distance: 6

. It appears you have mixed filament types. Be certain this is what you want. .

Swap Instructions:

Start with Black

At layer #10 (0.88 mm) swap to Gray

At layer #14 (1.2 mm) swap to Orange

At layer #16 (1.36 mm) swap to White for the rest.