0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-04-09 03:21:42
299
18
Report

Volcano

@fD667_1053716
Message
Follow
Recommended printing method
Description

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Size 150x150mm. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2mm and the Actual Depth is 2mm

 

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

 

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.

Filaments Used:

PLA Elegoo + Black Transmission Distance: 0.3

PLA Sunlu META Grey Transmission Distance: 3.6

PLA Sunlu Matte Blue Transmission Distance: 4.5

PLA Elegoo + Gray Transmission Distance: 3

PLA Elegoo + White Transmission Distance: 7

This print uses 5 unique filaments

 

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Grey

At layer #8 (0.72mm) swap to Blue

At layer #9 (0.8mm) swap to Gray

At layer #12 (1.04mm) swap to White for the rest.

Tags
volcano
nature
hueforge
window
deco
decoration
fire
strong
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.