0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-08-15 09:02:53
1.2k
160
Report

What a big head you have

@Corp_934816
Message
Follow
Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 200x200mm in size. You can change X and Y but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 4.6mm


Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Silver Transmission Distance: 0.5

PLA BambuLab Basic Beige Transmission Distance: 8

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 7 unique filaments. Substitute as needed.


Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Red

At layer #13 (1.12mm) swap to Blue Gray

At layer #14 (1.2mm) swap to Yellow

At layer #16 (1.36mm) swap to Silver

At layer #20 (1.68mm) swap to Beige

At layer #27 (2.24mm) swap to Silver

At layer #29 (2.4mm) swap to Red

At layer #37 (3.04mm) swap to Beige

At layer #44 (3.6mm) swap to Jade White for the rest.

Tags
Hood
wolf
fairy tale
Horror
girl
dog
art
hueforge
painting
picture
original
unique
License