Winter Haven - Christmas Bauble Ornament

If you want to sell prints of this model, as well as all of my models - future and past

Subscribe to My Patreon: C3D | 3D Models | Patreon

Step into a winter wonderland with Winter Haven ❄️🌲🏠, a serene ornament that captures the magic of a snow-covered cabin glowing warmly against the chilly night. From the softly illuminated windows to the frosted evergreens surrounding it, this piece brings to life the peacefulness of a quiet winter evening. The snowy textures and delicate details make it feel like you could walk right into this cozy retreat by the fire. Perfect for adding a touch of warmth and nostalgia to your Christmas tree or holiday decor! 🌨️✨🌲

• Two Ornament sizes 160mm(BIG) and 120mm(SMALL) - Pick the correct plate when slicing the file.

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)

The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4 / Amazon

PLA Jayo Gray Transmission Distance: 2.1 / Amazon

PLA Kingroon White Transmission Distance: 6.9 / Amazon

PLA Kingroon Orange Transmission Distance: 4.5 / Amazon

Color Pallete (4 Color Version):

Swap Instructions(4 Color Version):

Start with Black

At layer #16 (1.37mm) swap to Dark Gray

At layer #22 (1.85mm) swap to WHITE

At layer #35 (2.89mm) swap to Orange for the rest.