2025-03-30 16:14:36
5.8k
453
Yarn / Wool Spinner
@StudioLuxe_4837026
Donate
Message
Follow
Recommended printing method
Add
0.2 PLA (PETG will also work) Print with normal supports on baseplate
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:3
/ 8h 40m 10s
212
Share
Description
Yarn / Wool Spinner Model
This yarn/wool spinner allows you to mount a ball of wool onto the stem, that stem then easily rotates as you knit/crochet etc.
Prints in 3 pieces
Base
Arm
Stem
Print the base first, then the arm, gentle fit the bottom of the arm into the correct hole, rotate the arm a few times so it securely fits into the hole, ending with the arm facing the larger hole.
Print the stem with supports and carefully remove the support material.
Place a ball of wool onto the stem, then guide the small rod at the top of the stem into the hole at the top of the arm, then slide the bottom ball piece of the stem into the larger hole and allow the stem to drop down into the hole, it will now freely rotate.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
