mailbox nametag modular
Sign for the mailbox or the frontdoor.
Every letter takes exactly 16mm of space, so scale the length to fit amount of letters and numbers, in my example i'll be writing “NIELSEN” 7*16mm = 112mm.
I used 0.2 mm layer height, 2 walls and 100% infill on all parts, and used normal print speed for the letters.
Everything should fit pretty good but since every printer is'nt the same, you might have to sand the letter peices if they don't fit. Glue can be added to the end pieces but in my case it is'nt necessary
Color change for letters:
black color from layer height 0.0 - 2.0mm
white color from layer height 2.2 - 3.0mm
Secure the sign with double sided tape, and make you to use a clean and dry surface.
Enjoy!
Don't forget to post your makes :)
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
You can sell my designs I made available on my makerworld page. With a small sub on my Patreon you get a commercial license to sell and support my work: https://www.patreon.com/Dengamleninja
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
