0
0
:
0
0
:
0
0
:
0
0
Anycubic 11 周年,记录属于你的 3D 打印时刻
Makeronline
2026-11-13 06:48:02
95
3
举报

5V Relay Enclosure Housing

@3Dimensional_3786585
私信
关注
描述

Enclosure for the 5V Relay High/Low level Trigger

 

 

Neat protective case for the common 1-channel 5V relay module (KY-019 style / high-low trigger boards). The module drops in with the screw terminals and control pins fully accessible, and the secure clip-on lid keeps everything tidy. Optional cable clamps screw into the M3 inserts on either end to strain-relieve the wires — useful but not required.

 

You can screw-fix it via the mounting holes and circular foot or just stick it down with 3M double-sided tape (they’re light enough that tape works well). 

 

Designed for boards that are 50mm x 26mm. (internal measurement of enclosure is 50.5mm x 26.5mm).

 

I made this to go with my KY-003 wardrobe light project so the relay stayed neat and protected next to the sensor. Printed in PETG for durability. The matching KY-003 holder is available in my other models.

标签
5v relay
5v relay enclosure
relay case
relay enclosure
relay housing
relay box
relay mount
arduino
5v
1 channel relay
electronics case
high low level trigg
5v trigger
版权声明