2024-10-19 00:05:33
3.9k
503
Bottle opener three sizes
@vkobz_1020444
打赏
私信
关注
添加
PLA/PLA+ - 0.2mm layer height - 0.08mm height clearance
Kobra 3 Max
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 1h39m
110
分享
描述
I came across this great bottle opener, but I wanted the handles to be wider and easier to print. This device works on a good range of bottle cap sizes. PETG is recommended since it will flex and return to its original shape after use.
PRINT SETTINGS
PETG preferred (let me know how it turns out if you try PLA or any other material)
Supports will be needed on the flat overhang.
Print with the wider more open side on top.
5 walls, 15% infill
outer walls first
avoid putting the seam in the teeth, ideally placed at the end of a handle
标签
版权声明
基于以下模型二次创作
https://makerworld.com/en/models/427574?designId=427574#profileId-623471
