CableCap

CableCap – Flexible Conduit Cable Puller

No more cables snagging on the ribs of corrugated electrical pipes. Push it onto the cut end of your cable and pull smoothly through tight turns.

• Bullet Nose: Glides over corrugated tube ridges and through 90° bends.
• Internal One-Way Barbs: Grips the outer PVC jacket so the cap stays locked during pulls.
• Flex Relief Slots: Adapts easily to slight cable variations without splitting.

Print Settings

• Material: PETG (Recommended for toughness) or TPU 95A
• Orientation: Flat base on build plate (no supports needed)
• Walls: 3–4 walls
• Layer Height: 0.16 – 0.20 mm
• Infill: 100%