Customazible Graphic Bookends/Book Nooks

Hello everyone. If you're a reader you know how satisfying is to have all your books tidy on their shelfes. My latest creation can help you with that! Here enter my HueForge bookends/book nook with interchangeable spines created with HueForge. You can find all the STLs and print profiles - and they are a toon so if you appreciate it leave a like 😊 - for the Kobra 3 uploaded. Here are the HueForge instructions:

Project: classic.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA ERYONE Red Matte Transmission Distance: 5

PLA Artillery Yellow Transmission Distance: 9

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Red Matte

At layer #11 (0.96mm) swap to Yellow

At layer #16 (1.36mm) swap to White for the rest.

-----------------------------------------------------------------------------------------------------------------------

Project: economics.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA GratKit Green Transmission Distance: 10

PLA+ Sunlu Silver Transmission Distance: 2

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Green

At layer #13 (1.12mm) swap to Silver

At layer #16 (1.36mm) swap to White for the rest.

--------------------------------------------------------------------------------------------------------------

Project: fantasy.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA PRINSFIL Navy Blue Transmission Distance: 2

PLA+ Sunlu Blue Transmission Distance: 4

PLA ANYCUBIC Turquoise Transmission Distance: 12

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Navy Blue

At layer #8 (0.72mm) swap to Blue

At layer #10 (0.88mm) swap to Turquoise

At layer #11 (0.96mm) swap to White for the rest.

------------------------------------------------------------------------------------------------------

Project: horror.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA ERYONE Red Matte Transmission Distance: 5

PLA+ Sunlu Silver Transmission Distance: 2

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red Matte

At layer #11 (0.96mm) swap to Silver

At layer #16 (1.36mm) swap to White for the rest.

-----------------------------------------------------------------------------------------------

Project: mistery.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Gold Transmission Distance: 5

PLA+ Sunlu Silver Transmission Distance: 2

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Gold

At layer #13 (1.12mm) swap to Silver

At layer #15 (1.28mm) swap to White for the rest.

-------------------------------------------------------------------------------------------

Project: poetry 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.6x197.29mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA PRINSFIL Navy Blue Transmission Distance: 2

PLA ANYCUBIC Turquoise Transmission Distance: 12

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Navy Blue

At layer #8 (0.72mm) swap to Turquoise

At layer #13 (1.12mm) swap to White for the rest.

----------------------------------------------------------------------------------

Project: scifi 3.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.6x197.29mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA PRINSFIL Navy Blue Transmission Distance: 2

PLA+ Sunlu Blue Transmission Distance: 4

PLA ANYCUBIC Violet Transmission Distance: 9

PLA+ Esun Magenta Transmission Distance: 4.5

PLA+ Sunlu White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Navy Blue

At layer #8 (0.72mm) swap to Blue

At layer #10 (0.88mm) swap to Violet

At layer #11 (0.96mm) swap to Magenta

At layer #12 (1.04mm) swap to White for the rest.

----------------------------------------------------------------------------------

Project: science.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 39.5x196.79mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 1.7mm and the Actual Depth is 1.7mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA GratKit Green Transmission Distance: 10

PLA+ Sunlu White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Green

At layer #12 (1.04mm) swap to White for the rest.

------------------------------------------------------------------------

You can find more information about these models on my post: https://forum.makeronline.com/topic/If%20you%20love%20reading%20you%20cant%20miss%20these%20-1460.html